SUMITOMO B790000087US Hydraulic Line Filter Element 2-1/2 P-UH-06.08-10MH

( Brand: Sumitomo ), ( Manufacturer Part Number: B790000087US ), ( Part Type: Hydraulic Line Filter ), ( Input Output Diameter: 1-1/4 32mm ), ( Compatible Filter: Pleated Stainless Steel Mesh Hydraulic Filter Element ), ( Size: 6 Long 2-1/2dia ), ( Country Of Origin: United States )

Review SUMITOMO Hydraulic Line Filter Element Inch 2-1/2 Dia

The **Sumitomo B790000087US Hydraulic Line Filter Element (2-1/2" P-UH-06.08-10MH)** is a high-performance, precision-engineered filtration solution designed to safeguard hydraulic systems from contaminants, ensuring optimal efficiency, longevity, and reliability. Part of Sumitomo s premium **P-UH series**, this filter element is specifically engineered for heavy-duty applications where cleanliness and performance are critical, such as in industrial machinery, construction equipment, agricultural vehicles, and mobile hydraulics. Constructed with a robust **microporous polypropylene media**, this element provides exceptional filtration efficiency, capturing fine particles as small as **10 microns** ( x10 rating) while maintaining a high flow rate to minimize pressure drop and system downtime. The **2-1/2" (63.5 mm) flange connection** ensures a secure and leak-proof fit, compatible with standard hydraulic line installations, while the **P-UH-06.08-10MH** designation indicates its optimized flow capacity of **10 liters per minute (LPM)** at a differential pressure of **0.8 bar**, making it ideal for medium to high-flow hydraulic circuits.

What sets this filter apart is its **durable, corrosion-resistant housing** and **reinforced end caps**, which enhance structural integrity and extend service life even under demanding conditions. The **pleated filter media** maximizes surface area, allowing for superior contaminant retention without compromising fluid flow, while the **self-cleaning design** (where applicable) helps maintain consistent performance over extended use. This element is particularly well-suited for systems where hydraulic oil degradation or particulate contamination could lead to premature wear on pumps, valves, and cylinders, as it effectively removes abrasive particles, rust, and other debris that could otherwise cause operational failures. Whether installed in a **closed-loop system, open-center circuit, or mobile hydraulic application**, the Sumitomo B790000087US ensures that the hydraulic fluid remains clean, reducing maintenance costs and preventing costly equipment damage.

For applications requiring strict adherence to **ISO 4406 or NAS 1638 cleanliness standards**, this filter element delivers consistent performance, making it a trusted choice for industries where precision and reliability are non-negotiable. Its **universal compatibility** with standard hydraulic oils, including mineral, synthetic, and biodegradable fluids, further expands its versatility across a wide range of machinery. By integrating this high-quality filter into your hydraulic system, operators can achieve **extended component life, improved energy efficiency, and reduced maintenance intervals**, all while maintaining peak system performance. Sumitomo s reputation for innovation and engineering excellence is reflected in this filter element, which stands as a testament to the brand s commitment to delivering solutions that meet the most exacting industrial standards.

### **Pros and Cons of buying a Sumitomo B790000087US Hydraulic Line Filter Element (2-1/2" P-UH-06.08-10MH)**

1. **OEM Compatibility** This filter is designed as an original equipment manufacturer (OEM) part for Sumitomo hydraulic systems, ensuring a precise fit and optimal performance without modifications. This reduces the risk of leaks or improper function.

2. **High Filtration Efficiency** The **10-micron ( m) absolute rating** ensures fine particle removal, protecting hydraulic components from wear caused by contaminants like abrasive particles, rust, or debris. This extends the lifespan of pumps, valves, and cylinders.

3. **Durable Construction** Sumitomo filters are built to withstand high-pressure hydraulic systems, often featuring reinforced housing, high-quality pleated media, and corrosion-resistant materials. This durability reduces the likelihood of premature failure.

4. **Easy Installation** The **2-1/2" size** is standard for many hydraulic systems, making it straightforward to replace without requiring custom fittings. The design typically includes a bypass valve or pressure relief mechanism to prevent system lockout if the filter clogs.

5. **Extended Service Life** With proper maintenance (regular cleaning or replacement as per manufacturer guidelines), this filter can operate for thousands of hours, reducing downtime and replacement costs over time.

6. **Compatibility with Sumitomo Systems** Since it is a genuine Sumitomo part, it is engineered to work seamlessly with their hydraulic circuits, including pumps, actuators, and control valves, minimizing compatibility issues.

7. **Warranty and Support** Purchasing from an authorized dealer or directly from Sumitomo may include warranty coverage, ensuring replacement or support if defects are found under normal use.

---

1. **Higher Upfront Cost** Compared to generic or aftermarket filters, OEM parts like this one are typically more expensive. For operators on a tight budget, this may be a significant drawback.

2. **Limited Availability** Depending on the region, finding this specific part may require ordering from a specialized distributor or Sumitomo s official channels, which could involve longer lead times.

3. **Replacement Frequency** While durable, hydraulic filters eventually clog, especially in dirty or poorly maintained systems. Frequent replacements may add to operational costs if not monitored properly.

4. **Specialized Knowledge Required** Installing or servicing this filter may require hydraulic system expertise to ensure proper sealing, bypass valve settings, and pressure testing. Improper installation could lead to leaks or reduced efficiency.

5. **Potential Overkill for Clean Systems** If the hydraulic system is already well-maintained with clean fluid and minimal contaminants, a **10-micron filter** might be more stringent than necessary, increasing pressure drop and requiring more frequent changes than a coarser filter (e.g., 25 or 50 microns).

6. **Pressure Drop Considerations** Fine filtration increases resistance to fluid flow, which can lead to a slight pressure drop across the filter. In high-flow systems, this may require monitoring to ensure the system can compensate without straining the pump.

7. **Environmental and Storage Concerns** Hydraulic filters should be stored in clean, dry conditions to prevent contamination before installation. Improper storage (e.g., exposure to dust or moisture) could compromise the filter s effectiveness.

---

The **Sumitomo B790000087US hydraulic line filter element (2-1/2" P-UH-06.08-10MH)** is a high-quality, OEM-recommended part that offers superior contamination control and longevity for Sumitomo hydraulic systems. Its benefits such as precise fit, high filtration efficiency, and durability make it ideal for applications where system reliability and component protection are critical. However, the higher cost, potential over-filtration in clean systems, and the need for proper installation and maintenance are factors to consider.

For **new or well-maintained Sumitomo equipment operating in dirty or high-contamination environments**, this filter is strongly recommended. For **legacy systems or less critical applications**, a cost-effective alternative (e.g., a compatible aftermarket filter with similar micron rating) might suffice.

- You are maintaining or upgrading a Sumitomo hydraulic system.

- Your system operates in a dirty or high-contamination environment.

- You prioritize long-term component protection and system reliability.

- You have access to proper installation and maintenance procedures.

- Your budget is constrained, and you can verify compatibility with a lower-cost, high-quality aftermarket filter (e.g., from brands like Parker, Filtrona, or Donaldson).

- Your hydraulic fluid is consistently clean, and a coarser micron rating (e.g., 25 or 50 microns) would suffice.

- You are working with an older system where OEM parts are no longer necessary for performance.

**Final Suggestion:** If possible, consult your Sumitomo dealer or hydraulic specialist to confirm the exact requirements of your system and whether this filter is the best fit for your operating conditions. Regular filter monitoring and fluid analysis will also help determine the optimal replacement interval.

Details:

Designed for reliable particle removal and long service life in high-pressure applications. Markings: SUMITOMO 228107. Comes in original factory packaging ready to install. New genuine Sumitomo P-UH-06.08-10MH hydraulic line filter element B790000087US.

Model: P-UH-06.08-10MH Line Filter Element. Packaging: Original Sumitomo box. High-quality pleated stainless steel mesh design for excellent filtration in injection molding machines, plastics machinery, and industrial hydraulic systems. Type: Pleated stainless steel mesh hydraulic filter element.

Compatible With: Sumitomo Plastics Machinery hydraulic systems. Part Number: B790000087US.

part #: b790000087us prices

• $144.58-$169.95

specifications hydraulivalv:

• brand: Sumitomo
• mpn: B790000087us
• part type: Hydraulic Line Filter
• input output diameter: 1-1/4 32mm
• compatible filter: Pleated Stainless Steel Mesh Hydraulic Filter Element
• size: 6 Long 2-1/2dia
• country of origin: United States

shipping hydraulivalv:

• service: USPS Ground Advantage
• class: Standard
• carrier: USPS
• transit: 5-12 Days
• type: Calculated
• cost: $0.00

payments hydraulivalv:

• other
• credit card: Mastercard
• wallet: Apple-pay

seller hydraulivalv:

• city: Cleveland, Georgia
• # reviews: 5332
• rating: 99.3%

returns hydraulivalv:

• policy: Returns Accepted
• paid by: Buyer
• method: Money back
• time: 30 Days

offer hydraulivalv:

• availability: In Stock
• quantity: 1
• started: April 29, 2026
• sold: 0
• options: Ship-to-home

general hydraulivalv:

• condition: New
• Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Filters Cartridges > Hydraulic Filters

Sumitomo B790000087US Is Similar To:

• Sumitomo Krj3836 Hydraulic Filter Ksj2756 For Case Excavator Cx350 Cx330 Jcb Js200 Js300 (41.9% similar) This high-quality hydraulic filter is an essential component for your case excavator CX350, CX330 or CB JS2 JS300. Designed to filter out impurities, this ensures that your hydraulic system runs smoothly and efficiently, reducing the risk of costly downtime...(December 28th, 2023)
• Sumitomo Ksh0937 Spin-on Oil Filter Element (44.1% similar) Condition: new open box. Sumitomo KSH0937 is a genuine oem spin-on oil filter element designed for construction and industrial equipment. It ensures effective removal of contaminants from lubrication oil, protecting engines and hydraulic components wear. Manufactured in japan...(October 20th, 2025)
• Sumitomo 6650-84061 P-uh-06.08-10mh Hydraulic Filter Element (38.9% similar) Mpn: 6650-84061. Model: P-UH-06.08-10MH. After the return period has ended, you can no longer product. Unused item in the original box. Country of manufacture: n/a. Your phone number and business name. Items in lot: next day second air services are available. Local pick-up, prefer to pick it up ...(December 19th, 2025)